TFIX-8ST UNIVERSAL FACADE FIXINGS

The first thermal insulation combination screw fixing that can be countersunk together with the integrated insulation cap.

Technical Data Sheet

Features and benefits

Accurate countersunk setting automatically sets the fixing flush with the insulation layer
Integrated insulation cap (with unique surface reinforcement) equalizes thermal conductivity over the fixing point, whilst also leveling out drying times of render.
Unique sleeve compression zone for precision installations.
Simple countersunk installation in all substrates (A,B,C,D,E).
The long plastic overmoulding on the TFIX-8ST screw minimises thermal bridging (value 0.001-0,002W/K), contributing to energy-saving benefits
The shortest embedment depth at the maximum strength parameters
Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation
Plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system.
Pre-assembled elements of the fixing saves time and labour

request product

Fill in the form with your details and send request for a TFIX-8ST UNIVERSAL FACADE FIXINGS

Your request will be sent to our sales department. Please note this is not a purchase order.

Your name

Company

E-mail*

Phone number

Country*

Additional Information*

I consent to the processing by Rawlplug Ireland Ltd, Unit 10, Donore Business Park, Donore Road, Drogheda, Co. Louth A92 C522, my personal data provided in the above form for the purpose of processing and handling the inquiry made via the contact form. I have been informed that I can withdraw my consent at any time, but the withdrawal of my consent will not affect the legality of the processing of my personal data carried out prior to its withdrawal. I declare that I have read the content of the Privacy Policy and I accept it.

Verification: How many days are in a week? (hint: Enter a number)*

Base material

Concrete C12/15-C50/60 (Use category A)
Solid Brick (Use category B)
Solid Sand-lime Brick (Use category B)
Hollow Brick (Use category C)
Hollow Sand-lime Brick (Use category C)
Vertically-perforated clay block (Use category C)
Lightweight Concrete Block (Use category C)
Hollow Lightweight Concrete Block (Use category D)
Reinforced components of lightweight aggregate concrete (Use category D)
Aerated Concrete Block (Use category D)

Applications

Polystyrene (EPS) boards
Mineral wool (MW) boards
Polyurethane (PU) boards
External Thermal Insulation Composite Systems (ETICS)

Installation guide

Drill a hole of required diameter and depth
Drilling depth of min 35mm in A,B,C,D materials and 75mm in Aerated Concrete Block
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
Embedment depth of min 25mm in A,B,C,D materials and 65mm in Aerated Concrete Block
When using the KWX-63 the teeth should be embedded in the insulation material after hammering.

Downloads

Need documents for other product? Visit our Technical Library.

go to library

Associated products

RT-SDSA Drill bits Aggressor SDS plus
RT-SDSB Drill bits Brickdrill SDS plus
RT-SDSR Drill bits Rebardrill SDS plus
TFIX-8ST-TOOL Setting tool