TFIX-8P Facade fixing with plastic pin

Versatile hammer-in facade fixing with plastic nail recommended for ETICS

Technical Data Sheet

TFIX-8P Facade fixing with plastic pin - Technical Data Sheet

Features and benefits

Installation in all base materials (categories A,B,C,D,E)
The plastic nail reduces heat transmission (value 0.0W/K)
Pre-assembled expansion nail saves time and labour.
Unique nylon pin design reinforced with glass fibre allows fast and trouble-free installation with correct expansion of the plug.
Expansion zone designed for low embedment depths, reducing the amount of drilling required.
Can be used in combination with additional KWL plate - 90, 110 or 140mm diameter.

request product

Fill in the form with your details and send request for a TFIX-8P Facade fixing with plastic pin

Your request will be sent to our sales department. Please note this is not a purchase order.

Your name

Company

E-mail*

Phone number

Country*

Additional Information*

I consent to the processing by Rawlplug Ireland Ltd, Unit 10, Donore Business Park, Donore Road, Drogheda, Co. Louth A92 C522, my personal data provided in the above form for the purpose of processing and handling the inquiry made via the contact form. I have been informed that I can withdraw my consent at any time, but the withdrawal of my consent will not affect the legality of the processing of my personal data carried out prior to its withdrawal. I declare that I have read the content of the Privacy Policy and I accept it.

Verification: How many days are in a week? (hint: Enter a number)*

Product information

Size	Product Code	Fixing			Fixture
		Diameter	Length	Plate diameter	Recommended thickness
		d	L	D	t_fix A, B, C, D	t_fix E
		[mm]
Ø8	TFIX-8P-115-2	8	115	60	80	40
	TFIX-8P-135-2	8	135	60	100	60
	TFIX-8P-155-2	8	155	60	120	80
	TFIX-8P-175-2	8	175	60	140	100
	TFIX-8P-195-2	8	195	60	160	120
	TFIX-8P-215-2	8	215	60	180	140

Base material

Concrete C12/15-C50/60 (Use category A)
Solid Brick (Use category B)
Solid Sand-lime Brick (Use category B)
Hollow Brick (Use category C)
Vertically-perforated clay block (Use category C)
Hollow Sand-lime Brick (Use category C)
Hollow Lightweight Concrete Block (Use category D)
Lightweight Concrete Block (Use category C)
Reinforced components of lightweight aggregate concrete (Use category D)
Aerated Concrete Block (Use category D)

Applications

External Thermal Insulation Composite Systems (ETICS)
Polystyrene (EPS) boards
Polyurethane (PU) boards
Mineral wool (MW) boards
Lightweight wood wool building boards
Cork boards

Installation guide

Drill a hole of required diameter and depth
Clean the hole
Bottom side of the plate must be flush with the ETICS.
Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material.
Embedment depth of min 25 in masonry, perforated materials and lightweight concrete blocks and 65mm in aerated concrete.
In soft insulation panels the fixing should be combined with insulation retaining plates KWL-90, KWL-110, KWL-140.

Installation data

Substrate			A, B, C, D	E
Hole diameter in substrate	d₀	[mm]	8	8
Min. hole depth in substrate	h₀	[mm]	40	80
Min. installation depth	h_nom	[mm]	25	65
Min. substrate thickness	h_min	[mm]	100	110
Min. spacing	s_min	[mm]	100	100
Min. edge distance	c_min	[mm]	100	100
Fixing diameter	d	[mm]	8	8

Downloads

Need documents for other product? Visit our Technical Library.

go to library

Associated products

RT-SDSA Drill bits Aggressor SDS plus
RT-SDSB Drill bits Brickdrill SDS plus
RT-SDSR Drill bits Rebardrill SDS plus