RPS Hand Held Polyurethane Foam

Universal, one-component polyurethane foam with delivery tube.

Technical Data Sheet

RPS Hand Held Polyurethane Foam - Technical Data Sheet

Features and benefits

Ideal for mounting, sealing and soundproofing.
Suitable for use indoors and outdoors.
Excellent sound and thermal insulation properties.
Excellent adhesion to most materials and substrates used in construction.
Recommended for filling empty spaces and wide gaps
Resistant to mould and fungi.

request product

Fill in the form with your details and send request for a RPS Hand Held Polyurethane Foam

Your request will be sent to our sales department. Please note this is not a purchase order.

Your name

Company

E-mail*

Phone number

Country*

Additional Information*

I consent to the processing by Rawlplug Ireland Ltd, Unit 10, Donore Business Park, Donore Road, Drogheda, Co. Louth A92 C522, my personal data provided in the above form for the purpose of processing and handling the inquiry made via the contact form. I have been informed that I can withdraw my consent at any time, but the withdrawal of my consent will not affect the legality of the processing of my personal data carried out prior to its withdrawal. I declare that I have read the content of the Privacy Policy and I accept it.

Verification: How many days are in a week? (hint: Enter a number)*

Base material

Concrete
Masonry
Wood
Metal Sheet & Profiles
PVC Profile
Window Profile

For use also with

Solid Concrete Block
Hollow-core Slab
Concrete Slab
Aerated Concrete Block
Lightweight Concrete Block
Hollow Lightweight Concrete Block
Silicate Blocks
High-Density Natural Stone
Hollow Brick
Vertically-perforated Clay Block
Hollow Sand-lime Brick
Solid Brick
Solid Sand-lime Brick
Ceramic Hollow Block
Gypsum Fibreboards
Plasterboard
Chipboard
Oriented Strand Board
Stainless Steel

Installation guide

Wear protective gloves. Ensure surfaces are free from dust, dirt or debris.
Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from +5°C up to +30°C.
Shake can vigorously for 30 seconds to mix properly components.
Screw straw-applicator onto the can. Hold can upside-down during application.
Moisten surfaces with water prior to application.
Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 5 cm. Gaps wider than 5 cm should be applied after hardening of the previous layer. Each layer should be moistened with water using a spray.
After full curing, cut the excess foam with a knife and protect it from UV exposure by coating with plaster, paint, acrylic or silicone.

Downloads

Need documents for other product? Visit our Technical Library.

go to library