R-SL-MA-GRAIN Facade Acrylic

Acrylic dispersion sealant

Features and benefits

  • Solvent-free
  • Flexible plastic joint, water-resistant after curing.
  • Can be painted when fully-cured.
  • Suitable for most construction substrates.
  • Designed for internal and external use, with resistance to changeable weather conditions, once cured.

Contact us to get information about product availability and its price

Fill in the form with your details and send request for a R-SL-MA-GRAIN Facade Acrylic

Your request will be sent to our sales department. Please note this is not a purchase order.

    Base material

    • Plaster


    • Aerated Concrete Block

      Aerated Concrete Block

    • Silicate Blocks

      Silicate Blocks

    • Metal Sheet & Profiles

      Metal Sheet & Profiles

    • Stainless Steel

      Stainless Steel

    • Concrete


    • Masonry


    • Wood


    • Plasterboard


    • PVC Profile

      PVC Profile

    For use also with

    • Solid Concrete Block

      Solid Concrete Block

    • Hollow-core Slab

      Hollow-core Slab

    • Concrete Slab

      Concrete Slab

    • Lightweight Concrete Block

      Lightweight Concrete Block

    • Hollow Lightweight Concrete Block

      Hollow Lightweight Concrete Block

    • High-Density Natural Stone

      High-Density Natural Stone

    • Hollow Brick

      Hollow Brick

    • Vertically-perforated Clay Block

      Vertically-perforated Clay Block

    • Hollow Sand-lime Brick

      Hollow Sand-lime Brick

    • Solid Brick

      Solid Brick

    • Solid Sand-lime Brick

      Solid Sand-lime Brick

    • Ceramic Hollow Block

      Ceramic Hollow Block

    • Gypsum Fibreboards

      Gypsum Fibreboards

    • Plasterboard


    • Chipboard


    • Oriented Strand Board

      Oriented Strand Board

    • Stainless Steel

      Stainless Steel

    • Ceramics


    Installation guide

    Installation guide
    Installation guide
    Installation guide
    1. Clean up the gap. Surface, that the acrylic will be applied on, should be clean, free of dust, dirt, grease, oil, rust, remains of old sealant and other substances that might lower the cohesion.
    2. In case of absorptive substrates, the priming is suggested. The test of adhesion prior application is also recommended.
    3. Prior to application, protect edges with masking tape
    4. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator on to the thread, then cut at the required angle to give an aperture width suited to the joint.
    5. Use manual or pneumatic gun applicator.
    6. The applied acrylic can be smoothed with a spatula.
    7. After completing the application, wipe tools with a paper towel and wash with water.
    8. Fully dried product should be secured with plaster, paint etc.


    Need documents for other product? Visit our Technical Library.

    go to library
    Go to top