Rawlplug Ireland

Universal polyester (styrene free) resin - European Approval for 15 substrates

R-KEM II with Threaded Rods for Concrete

Technical Data Sheet

R-KEM II with Threaded Rods for Concrete - Technical Data Sheet

Features and benefits

Approved for use in non-cracked concrete (EAD 330499-01-0601), working life up to 100 years
Available in a winter version with faster curing time. It can be used from -20°C.
Three colors - standard, stone & gray
The most convenient bonded anchor for general purpose use
Quick, secure and simple installation
Product with wide spectrum of use in the medium load capacity area
Ideal for applications where mechanical anchors are not suitable
Easy dosage thanks to patented self-opening system and use of manual or electric gun
Option of use standard manual silicone gun
Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Product information

Product Code	Resin	Description / Resin Type	Volume
Product Code	Resin	Description / Resin Type	[ml]
R-KEM-II-175	R-KEMII	Styrene Free Polyester Resin	175
R-KEM-II-300	R-KEMII	Styrene Free Polyester Resin	300
R-KEM-II-410	R-KEMII	Styrene Free Polyester Resin	410
R-KEM-II-300-W	R-KEMII-W	Low Temperature (Winter) / Rapid Cure Styrene Free Polyester Resin	300
R-KEM-II-300-S	R-KEMII-S	High Temperature (Summer) / Slow Cure Styrene Free Polyester Resin	300
R-KEM-II-175-SET	R-KEMII	Set with 4 studs and plastic sleeves	175
R-KEM-II-300-SET	R-KEMII	Set with 4 studs and plastic sleeves	300
R-KEM-II-300-STONE	R-KEMII	Stone colour Styrene Free Polyester Resin	300
R-KEM-II-410-STONE	R-KEMII	Stone colour Styrene Free Polyester Resin	410
R-KEM-II-300-GREY	R-KEMII	Grey colour Styrene Free Polyester Resin	300
R-KEM-II-410-GREY	R-KEMII	Grey colour Styrene Free Polyester Resin	410
R-KEM-II-300-SV	R-KEMII	Styrene Free Polyester Resin	300
R-KEM-II-175-PL/H	R-KEMII	Styrene Free Polyester Resin	175
R-KEM-II-300-P2G6N#1	R-KEMII	Styrene Free Polyester Resin	300
R-KEM-II-300-P2GUN#1	R-KEMII	Styrene Free Polyester Resin	300
R-KEM-II-300-PL/H	R-KEMII	Styrene Free Polyester Resin	300

R-STUDS

Size	Product Code			Anchor		Fixture
	Steel class 5.8	Steel class 8.8	Steel grade A4	Diameter	Length	Hole diameter
				d	L	d_f
				[mm]	[mm]	[mm]
M8	R-STUDS-08110	R-STUDS-08110-88	R-STUDS-08110-A4	8	110	9
M8	R-STUDS-08160	-	R-STUDS-08160-A4	8	160	9
M10	R-STUDS-10130	R-STUDS-10130-88	R-STUDS-10130-A4	10	130	12
	R-STUDS-10170	-	-	10	170	12
	R-STUDS-10190	-	-	10	190	12
M12	R-STUDS-12160	R-STUDS-12160-88	R-STUDS-12160-A4	12	160	14
	R-STUDS-12190	-	R-STUDS-12190-A4	12	190	14
	R-STUDS-12220	-	-	12	220	14
	R-STUDS-12260	-	-	12	260	14
	R-STUDS-12300	-	R-STUDS-12300-A4	12	300	14
M16	R-STUDS-16190	R-STUDS-16190-88	R-STUDS-16190-A4	16	190	18
	R-STUDS-16220	-	-	16	220	18
	R-STUDS-16260	-	-	16	260	18
	R-STUDS-16300	-	-	16	300	18
	R-STUDS-16380	-	-	16	380	18
M20	R-STUDS-20260	R-STUDS-20260-88	R-STUDS-20260-A4	20	260	22
	R-STUDS-20300	-	-	20	300	22
	R-STUDS-20350	-	-	20	350	22
M24	R-STUDS-24300	R-STUDS-24300-88	R-STUDS-24300-A4	24	300	26
M30	R-STUDS-30380	R-STUDS-30380-88	-	30	380	32

Base material

Non-cracked concrete C20/25-C50/60

For use also with

Natural Stone (after site testing)

Applications

Consoles
Staircases
Gates
High racking
Canopies
Sanitary appliances
Steel constructions
Railings
Handrails
Ladders
Cable trays

Installation guide

Drill hole to the required diameter and depth for stud size being used.
Solid substrates: clean the drill hole thoroughly with brush and hand pump at least four times before installation.
Insert cartridge into gun and attach nozzle.
Dispense to waste until even colour is obtained.
Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Attach fixture and tighten the nut to the required torque.

Installation data

R-STUDS

Size			M8	M10	M12	M16	M20	M24	M30
Thread diameter	d	[mm]	8	10	12	16	20	24	30
Hole diameter in substrate	d₀	[mm]	10	12	14	18	24	28	35
Hole diameter in fixture	d_f	[mm]	9	12	14	18	22	26	33
Min. hole depth in substrate	h₀	[mm]	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5
Min. substrate thickness	h_min	[mm]	h_nom + 30 ≥ 100	h_nom + 30 ≥ 100	h_nom + 30 ≥ 100	h_nom+ 2d₀	h_nom+ 2d₀	h_nom+ 2d₀	h_nom+ 2d₀
Installation torque	T_inst	[Nm]	10	20	40	80	120	180	300
Min. spacing	s_min	[mm]	40	40	40	50	60	70	85
Min. edge distance	c_min	[mm]	40	40	40	50	60	70	85
MINIMUM EMBEDMENT DEPTH
Min. installation depth	h_nom,min	[mm]	60	70	80	100	120	140	165
MAXIMUM EMBEDMENT DEPTH
Min. installation depth	h_{nom, max}	[mm]	160	200	240	320	400	480	600

Minimum working and curing time

R-KEM II

Resin temperature	Concrete temperature	Curing time*	Working time
[°C]	[°C]	[min]	[min]
5	-20	-	-
5	-15	-	-
5	-10	-	-
5	-5	8 h	70
5	0	4 h	45
5	5	2 h	25
10	10	1.5 h	15
15	15	1 h	9
20	20	45	5
25	30	30	2
25	35	-	-
25	40	-	-

*For wet concrete the curing time must be doubled

R-KEMII-W

Resin temperature	Concrete temperature	Curing time*	Working time
[°C]	[°C]	[min]	[min]
5	-20	24 h	45
5	-15	18 h	30
5	-10	8 h	20
5	-5	5 h	11
5	0	2 h	7
5	5	1 h	5
10	10	45	2
15	15	30	1.5
20	20	15	1
25	30	-	-
25	35	-	-
25	40	-	-

*For wet concrete the curing time must be doubled

R-KEMII-S

Resin temperature	Concrete temperature	Curing time*	Working time
[°C]	[°C]	[min]	[min]
5	-20	-	-
5	-15	-	-
5	-10	-	-
5	-5	24 h	180
5	0	18 h	120
5	5	12 h	60
10	10	8 h	45
15	15	6 h	25
20	20	4 h	15
25	30	1.5 h	7
25	35	1 h	6
25	40	45	5

*For wet concrete the curing time must be doubled

Downloads

Need documents for other product? Visit our Technical Library.

go to library

request product

Fill in the form with your details and send request for a R-KEM II with Threaded Rods for Concrete

Your request will be sent to our sales department. Please note this is not a purchase order.

Your name

Company

E-mail*

Phone number

Country*

Additional Information*

I consent to the processing by Rawlplug Ireland Ltd, Unit 10, Donore Business Park, Donore Road, Drogheda, Co. Louth A92 C522, my personal data provided in the above form for the purpose of processing and handling the inquiry made via the contact form. I have been informed that I can withdraw my consent at any time, but the withdrawal of my consent will not affect the legality of the processing of my personal data carried out prior to its withdrawal. I declare that I have read the content of the Privacy Policy and I accept it.