Rawlplug Ireland

Throughbolt anchor with corrosion-resistant coating for cracked and non-cracked concrete

Technical Data Sheet

R-HPTIIIZP Zinc Plated Throughbolt - Technical Data Sheet

Features and benefits

A new generation of band anchors with a galvanized zinc coating
High performance in cracked and non-cracked concrete confirmed by ETA Option 1
Highest quality ensures maximum load capability
For applications requiring fire resistance up to 120 minutes
Suitable for reduced embedment to avoid contact with reinforcement
Embedment depth markings help to ensure precise installation of the anchor
Design of R-HPTII allows drilling and installing directly through the fixture and helps to reduce installation time
Fire resistant
Anchors can be used in earthquake risk zones - seismic category C1 and C2
Adjustable embedment depth in cracked and uncracked concrete C20/25-C50/60
The new geometry of the expansion band with an additional ring at its end ensures optimal contact with the concrete
Small distances from the edge of the concrete and between the anchors
Optimized cone shape to increase the angle of attack of the band on the ground, which translates into greater load capacity of the anchor in concrete
Anchor length identification mark to identify embedment length/depth. Facilitates post-installation inspection.
factories in Europe, with experience in the automotive and industrial sectorsmingScrews are produced in one of the largest and most renowned cold for
The production of concrete screwes takes place on bar stock, manufactured in a Polish steel mill

Product information

Size	Product Code	Anchor		Fixture
		Diameter	Length	Max. thickness	Hole diameter
		d	L	t_fix	d_f
		[mm]	[mm]	[mm]	[mm]
M8	R-HPTIIIZP08060/10	8	60	10	9
	R-HPTIIIZP08075/25	8	75	25	9
	R-HPTIIIZP08085/35	8	85	35	9
	R-HPTIIIZP08095/45	8	95	45	9
	R-HPTIIIZP08105/55	10	105	55	9
	R-HPTIIIZP08115/65	8	115	65	9
M10	R-HPTIIIZP10065/5	10	65	5	12
	R-HPTIIIZP10080/20	10	80	20	12
	R-HPTIIIZP10095/35	10	95	35	12
	R-HPTIIIZP10130/70	10	130	70	12
M12	R-HPTIIIZP12080/5	12	80	5	14
	R-HPTIIIZP12100/25	12	100	25	14
	R-HPTIIIZP12115/40	12	115	40	14
	R-HPTIIIZP12125/50	12	120	50	14
	R-HPTIIIZP12135/60	12	135	60	14
	R-HPTIIIZP12150/75	12	150	75	14

Base material

Cracked concrete C20/25-C50/60
Non-cracked concrete C20/25-C50/60
Reinforced concrete
Unreinforced concrete

For use also with

Natural Stone (after site testing)

Applications

Cladding restraints
Consoles
Barriers
Structural steel
Curtain walling
Handrails
Heavy Plant
Balustrading
Passenger lifts
Facades
Racking systems
Platforms
Fencing & gates manufacturing and installation

Installation guide

Drill a hole of required diameter and depth
Clear the hole of drilling dust and debris (using blowpump or equivalent method)
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached
Tighten to the recommended torque

Installation data

Size			M8	M10	M12
Thread diameter	d	[mm]	8	10	12
Hole diameter in substrate	d₀	[mm]	8	10	12
Installation torque	T_inst	[Nm]	15	40	50
Wrench size	Sw	[mm]	13	17	19
External diameter of washer		[mm]	16	20	24
STANDARD EMBEDMENT DEPTH
Min. hole depth in substrate	h_0,s	[mm]	60	73	88
Min. installation depth	h_nom,s	[mm]	55	68	80
Min. substrate thickness	h_min,s	[mm]	100	120	140
REDUCED EMBEDMENT DEPTH
Min. hole depth in substrate	h_0,r	[mm]	45	53	68
Min. installation depth	h_nom,r	[mm]	40	48	60
Min. substrate thickness	h_min,r	[mm]	80	80	100
Min. edge distance	c_min	[mm]	40	45	55
Min. spacing	s_min	[mm]	35	40	50

Downloads

Need documents for other product? Visit our Technical Library.

go to library

request product

Fill in the form with your details and send request for a R-HPTIIIZP Zinc Plated Throughbolt

Your request will be sent to our sales department. Please note this is not a purchase order.

Your name

Company

E-mail*

Phone number

Country*

Additional Information*

I consent to the processing by Rawlplug Ireland Ltd, Unit 10, Donore Business Park, Donore Road, Drogheda, Co. Louth A92 C522, my personal data provided in the above form for the purpose of processing and handling the inquiry made via the contact form. I have been informed that I can withdraw my consent at any time, but the withdrawal of my consent will not affect the legality of the processing of my personal data carried out prior to its withdrawal. I declare that I have read the content of the Privacy Policy and I accept it.

Verification: How many days are in a week? (hint: Enter a number)*

Associated products

RT-MAXA Drill bits Aggressor SDS max
RT-SDSA Drill bits Aggressor SDS plus
RT-IS Long impact sockets 1/2"
RT-SDSR Drill bits Rebardrill SDS plus
R-BLOWPUMP Blow Pump