R-BRUSH Manual Cleaning System
Brush accessory for cleaning out holes prior to anchor installation
Features and benefits
- Ideal for cleaning dust from drilled holes prior to applying bonded anchors or installing mechanical anchors
- Hole cleaning is necessary for correct loads
- Suitable for variable anchor embedment depths up to 2,5 m.
- Suitable for repetitive and frequent use.
Product information
Product Code |
Length |
Diameter |
Drill diameter |
Stud size |
Rebar diameter |
L |
D |
ds |
|||
[m] |
[mm] |
[mm] |
- |
[mm] |
|
R-BRUSH-EXT-LH |
360 |
- |
- |
- |
- |
R-BRUSH-EXT-LT |
360 |
- |
- |
- |
- |
R-BRUSH-12-TC |
200 |
12 |
10 |
M8 |
- |
R-BRUSH-14-TC |
200 |
14 |
12 |
M10 |
8 |
R-BRUSH-16-TC |
200 |
16 |
14 |
M12 |
10 |
R-BRUSH-18-TC |
200 |
18 |
16 |
- |
12 |
R-BRUSH-20-TC |
200 |
20 |
18 |
M16 |
14 |
R-BRUSH-22-TC |
200 |
22 |
20 |
- |
16 |
R-BRUSH-27-TC |
200 |
27 |
25 |
M20 |
20 |
R-BRUSH-32-TC |
200 |
32 |
30 |
M24 |
25 |
R-BRUSH-37-TC |
200 |
37 |
35 |
M30 |
28 |
R-BRUSH-42-TC |
200 |
42 |
40 |
- |
32 |
R-BRUSH-52-TC |
200 |
52 |
50 |
- |
40 |
Base material
-
Concrete C12/15-C50/60
Applications
- Drilling holes in concrete, brick and stone
- Rebar missed-outs
- Rebar
- Post-installed rebar connections
- Formwork installation
- Securing formwork
- Shear dowel connections
- Foundation wall connections
- Renovation and modrnization of bridges, buildings.
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.
- Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.
- Clean the hole twice with a prepared brush set.
- Clean the hole again with compressed air.
Contact us to get information about product availability and its price